The notice of how to do daily maintenance of laser tube

¡¡¡¡In answer to the requirement from some distributors and partners, hereby we notify the daily maintenance as following:

1£ºThe installation of laser tube: Generally the location of laser tube stand shall be at the 1/4 point of the end of laser tube. In the condition of connecting with water cooling system, please rotate laser the tube slightly until the light spot and power reaches the best status.

2£ºThe circular water must be clean, if you find the water get dirty, you need to change the water immediately. Exchanging water cannot make it cold or hot suddenly. Otherwise, it is easy to cause laser tube crack. The cooling water¡¯s temperature shall at around 18-15 degree. More than 30 degree will cause the laser power decrease gradually. The circular water inside the laser tube should not have air bubbles, if not, please squeeze the water pipe to get rid of air.

3£ºIf it accumulate some precipitate after using for a long time, you¡¯d better remove the laser tube, wash it by water, then re-install it.

4£ºPlease ensure that the mirror at the end of the laser tube must be clean, this is very important. If the laser tube works in very hard condition, the mirror must be cleaned with alcohol by professional personnel to ensure the laser power normal.

5£ºDuring the using of laser tube, please set the current according to Puri laser¡¯s power requirement. If too high, it will shorten lifespan of laser tube. Meanwhile, do not let the laser tube work at the limit power for long time, it will shorten lifespan of laser tube.

Shanghai Puri Laser Technology Co., Ltd.
Oct.12th,2012



HQ Room 2212-2216, 22nd Floor, No. 58,
Add£º Jinxin Road, Pudong, Shanghai,China
Tel£º 021-50318411 50318412
  ¡¡¡¡50318413 50318414
Fax£º 021-50318418   50318428
Email: info@goldensign.net

Factory Add: Heqin town, Pudong, Shanghai,China
Tel£º 021-50429732 50429765 50429827
Fax£º 021-55220967    
Email£º info@goldensign.net




This web keywords£ºLaser tube£¬CO2 laser tube£¬Laser power£¬CO2 laser power